BROKEN TOOLS AGREEMENT
You are
responsible to take a good care of the tool.
Remember there are other enthusiasts waiting. If you
break it then they will have to wait even
longer.
ROLLER SHAFT
(NUT AND LOCKING CLIP)
 
Please do not
remove
/ adjust / tighten nut w/ locking clip.
There have been
experiences where renter stripped the thread of
this shaft and there is no replacement part.
If you need
to adjust the roller,
please do not adjust this part.
HUB PLATE
Please use
the
provided washers
and do not
over tighten.
Just snug fit will
work fine. No need to tighten it to 120 lbs of
torque.
Be careful to not bent/damage the hub plate.
FLARE / WIDE
BODY
The fender rolling
tool IS NOT
designed to create "FLARE" of the rear fender
for that "WIDE BODY" look. It is not recommended.
You will damage or bent the tool by putting too
much stress.
EUROPEAN
VEHICLES
European Vehicles are known to have stronger
design/material fender lip compared to average
Japanese Cars (Soft metal fender lip with "L" shape that can easily be
rolled). For example: BMW vehicles: Fender lip is
stiff and strong and it also has padding inside
the fender lip.
Please take an
extra care when rolling stiff fender lip. As
long as you use the tools w/ PROPER CARE,
SLOWLY, and PATIENTLY, you will not likely break
the tool.
Please do not
apply pressure and roll as if the tool is made of strongest
material out there. Many users (including
myself) did not break/bent the tools so I am
sure, w/ proper care and patient, you will not
bent/break the tools.
PACKING THE
TOOL
I shipped to tool
to you semi disassembled to fit in a small box.
Please return and pack it in the same way.
DEPOSIT
You will loose the
deposit if you break/bent the tools.
Please take an
extra care during use to prevent loosing your
deposit.
|
